Airflow Direction Control - Daikin ATXS35EV1B7 Service Manual

Main Functions
1.2

Airflow Direction Control

Power-Airflow The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
control area in cooling, heating and dry mode.
Dual Flaps
Heating Mode
During heating mode, the large flap enables direct warm air straight downwards. The flap
presses the warm air above the floor to reach the entire room.
Cooling Mode
During cooling mode, the flap retracts into the indoor unit. Then, cool air can be blown far and
pervaded all over the room.
Wide-Angle The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Louvres
Auto-Swing The following table explains the auto swing process for heating, cooling, dry and fan :
COMFORT The vertical swing flap is controlled not to blow the air directly on the person in the room.
AIRFLOW Mode
18
Vertical Swing (up and down)
Cooling / Dry
10 °
50 °
(R4281)
The airflow rate is controlled automatically within the following steps.
Cooling: L tap – MH tap (same as AUTOMATIC)
Heating: ML tap – M tap
The latest command has the priority between POWERFUL and COMFORT AIRFLOW.
Heating
70 °
(R4303)
Heating
5 °
30 °
65 °
(R4282)
Cooling
5 °
(R4302)
Horizontal Swing
(right and left: manual)
Fan
70 °
(R4283)
Function and Control
SiBE04-824
(R4284)