Air System - Skymaster ARF PLUS PRO F4 C/E PHANTOM Assembly And Operation Manual

AIR SYSTEM:

You will need 2 x 2way and 1x 1way + sequencer for doors and brakes. You will
need 3 x 2 way for operating canopy and lock. All work done at factory.
Glue the air tanks (3) with silicon
Use quick connectors on fuselage joints to help
with break up of model.
Fit the 3 filler valves and 3 pressure gauges
onto epoxy tray in nose
Plumb the landing gear, door and brake system by using color air tubing. T all
same color tubing together until a single pipe emerge.
Fit electronic valves + sequencers on tray.
Secure 3 x 2 way electronic valves. This will be for locking and opening
canopy. Canopy use sequencer to lock canopy in down position.
Air leaks can damage your model! Please do a thorough check for air leaks. Make
sure the system can hold pressure for at least an hour in the up and down position.
Do not rush this installation.
Assembly & Operation Manual
Photo 35
P-18
Photo 34