Table of Contents
Advertisement
Quick Links
1/5 Scale Almost-Ready-To-Fly RC Jet
The F-16 "Fighting Falcon" by Skymaster
The 1/5 F16 produced by Skymaster is the result of years of R&D work and excessive testing. We are proud that
you have decided to buy the best ARF 1/5 F16 in the market today. We hope you enjoy your F16! Please note that
the photos show certain views from the prototypes. Some modifications and upgrades might have taken place by
the release of the model. We have tried to produce a very scale replica of this classic jet. Many scale options are
included with your model including operating canopy, speed brakes, spoilers and ordinance kit. This manual de-
scribes the assembling of " PRO" model. Opening canopy, speed brakes, landing gear and doors are factory in-
stalled. Before you start building and setting-up your aircraft, please make sure you have read this instruction man-
ual, and understood it. If you have any questions, please don't hesitate to contact us. Below are the contact details:
Office Taiwan:
No.15, Min-San 3rd Street, Ren-Wu Area, Kaohsiung, 814, Taiwan, R.O.C.
TEL: +886 9 3299 7923
FAX: + 886 7373 1215
http://www.skymasterjet.com
Sales : skymaste@skymasterjet.com
Technical support : morne.m@pixie.co.za
Assembly and operations manual
SM © 2015
Spesifications
Type
: T.A.V.S ARF PRO
Scale : 1/5
Length : 120.5": (3060mm)
Span
: 80.5 ": (2550mm)
Weight : 21—23 Kg
Engine : 1 x 18-21 Kg
Radio : 12 Ch ( 8—11servo's)
Advertisement
Table of Contents
Related Manuals for Skymaster ARF Plus Pro F-16 Falcon
Summary of Contents for Skymaster ARF Plus Pro F-16 Falcon
- Page 1 The F-16 “Fighting Falcon” by Skymaster The 1/5 F16 produced by Skymaster is the result of years of R&D work and excessive testing. We are proud that you have decided to buy the best ARF 1/5 F16 in the market today. We hope you enjoy your F16! Please note that the photos show certain views from the prototypes.
-
Page 2: Table Of Contents
Assembly & Operation Manual Index: INTRODUCTION............................3 DISCLAIMER..............................3 WARNING…...............................3 ARF PAINT..............................4 FINISHING YOUR F16 ARF........................4 HANDLING & TRANSPORTING .......................5 TOOL LIST..............................6 HEALTH…..............................7 GENERAL ASSEMBLY TECHNIQUES....................…7 RADIO EQUIPMENT & ACCESSORIES…………….................8 KIT CONTENTS…….…………….......................9 OPTIONAL PARTS………………..………………..................10 SLATS……………………………………………………………………………………………………………...12 FLAPS..............................13 STABILIZERS............................14 RUDDER………............................15 FUSELAGE REAR..…………………..................,,.... 16 FUSELAGE JOINT..………………………………………………………………………………………….17 FUEL CELLS…………………………………………………………………………………………………...…17 FUEL DIAGRAM………………………….………………………………………………………………………18... -
Page 3: Introduction
INTRODUCTION Thank you for purchasing Skymaster arf pro F16! We have put a lot of effort and time into this model. We at Skymaster strive to be a market leader in the ARF— jet market. We were the first company to produce ARF—jets in the world and we would like to continue being amongst the best. -
Page 4: Arf Paint
Assembly & Operation Manual ARF Paint The color finish on your Skymaster F16 arf pro model was applied out of the mould. We have used only the highest standard automotive paints to finish your model. Should you damage the finish, Skymaster stock the color paint and hardener required for the repair. -
Page 5: Handling & Transporting
Assembly & Operation Manual HANDLING & TRANSPORTING Composite models are very light but strong. These characteristics do have a down side! It is brittle. Take care when handling your model. DO NOT ATTEMPT TO PICK UP AN FULLY FUELED MODEL BY THE LEADING EDGE BY YOURSELF! The leading edges will crack and delami- nate. -
Page 6: Tool List
8. Thread-locking compound (Loctite, or equivalent) At Skymaster we try our best to offer you a high quality kit, with outstanding value-for money, and as complete as possible. However, if you feel that some additional or different hardware should be included, please feel free to let... -
Page 7: Health
The glass cloth side of parts to glue, should be sanded with #80 grit paper for best glue adhesion. Support the fuselage on foam pads. Skymaster makes every attempt to insure that the parts fit. However, due to manufac- turing tolerances, some parts may fit a little tight. Always trial fit parts and adjust if needed. -
Page 8: Radio Equipment & Accessories
Assembly & Operation Manual Radio equipment Failure to use the recommended servos, output arms, extensions, and hardware may result in a loss of control! Throughout this manual we make use of various types of servos and radio equipment! We have used JR equipment during the installation process. If you make use of an- other manufacturer, please use equipment with similar specifications! The F16 will require extension leads! Please use high quality extension leads. -
Page 9: Kit Contents
Assembly & Operation Manual Kit Contents Picture A F16 ARF PRO Contents: Picture A Fuselage front and rear section. Fin + Rudders & nose cone & tail cone. Nose gear + Main gear + doors installed + spoilers installed Wings left and right + flaps + ailerons Elevator left and right Ventral fins Canopy assembly + glass... -
Page 10: Optional Parts
Assembly & Operation Manual OPTIONAL PARTS Slat Mounts Aircraft Grade Aluminum Included with kit Photo 1 3 x Air Tanks 1 x Retract Valve 2 x Filler & 2 x Pressure Gauges 1 x Electronic Brake Valve 5 x Air Tubing, 10 x Quick Disconnect 8 x T-pieces Photo 2 Fuel Tank... - Page 11 Assembly & Operation Manual L/G hydrolic set Photo 8 Metal horns Tank Hardware Photo 9 Photo 10 LG Set + Steering Photo 11 Photo 12 Afterburner rings Orbinance & Pylons Photo 14 Photo 13 P-11...
-
Page 12: Slats
Assembly & Operation Manual WINGS NOTE: Make sure to have some sort of protective foam on the work bench. This will protect the paint surface from unwanted dents. Assemble both wings simultaneously. Mark √ each step. The 1/5 F16 have 2 control surfaces on each wing. Slat and Flaperon. It is up to you in what configuration you would like to build F16. -
Page 13: Flaps
Assembly & Operation Manual NOTE: The flap servos are located inside the fuselage. It is very important to match the flap slot with servo actuator. If you use other servos than JR, you will need to modify the height of the servo for best fit. Photo 24 Photo 22 Photo 23... -
Page 14: Stabilizers
Assembly & Operation Manual ELEVATORS NOTE: Use some protective foam on the work bench to protect the paint surface from unwanted dents. A removable elevator mechanism is installed. Mark √ each step. Photo 28 Photo 29 Photo 30 Make up elevator horn. 1pr semetrical. Bearing is 55 mm from centre of screw to to shaft(p30) Trial fit JR8911 servo to elevator mount. -
Page 15: Rudder
Assembly & Operation Manual RUDDER NOTE: Make sure to have some sort of protective foam on the work bench. This will protect the paint surface from unwanted dents. Note that we have used JR servos. If you use different servos, you may need to shim servo to fit rudder slot. No play must be present. -
Page 16: Fuselage Rear
Assembly & Operation Manual FUSELAGE REAR Photo 39 Photo 40 Photo 41 Photo 42 Photo 43 Photo 44 Before joining the fuselage it is necessary to tidy up the servo wires. Make sure wires are secure and will not touch the tailpipe. Tidy up the air line. -
Page 17: Fuselage Joint
Assembly & Operation Manual FUSELAGE JOINT Photo 47 Photo 48 Photo 49 Route all air tubing and servo wires clear of tank. Secure front fuselage with Photo 50 FUEL CELLS NOTE: Bad plumbing lead to flame outs. This will destroy your model. Please take your time and do a good job. -
Page 18: Fuel Diagram
Assembly & Operation Manual FUEL CELL DIAGRAM Photo 54 P-18... -
Page 19: Air System
Assembly & Operation Manual AIR SYSTEM You will need 2 x 2way and 1x 1way + sequencer. All work done at factory. Glue the air tanks (3) with silicon Use quick connectors on fuselage joints to help with break up of model. Fit the 3 filler valves and 3 pressure gauges onto plywood tray. -
Page 20: Air Diagram
Assembly & Operation Manual For scale functions such as speed brake and opening canopy you will require addi- tional 2 way electronic valves. Photo 57 AIR DIAGRAM Photo 58 Diagram for retracts P-20... -
Page 21: Turbine Installation
Assembly & Operation Manual TURBINE INSTALLATION Please follow the instructions supplied with your turbine. Run all turbine wires and power cables on opposite side of servo wires. Always secure all wires in harness. I would suggest you install a FOD. This will save you money in the long run. -
Page 22: Cockpit & Canopy
Assembly & Operation Manual COCKPIT AND CANOPY (after painting) Photo 64 Photo 65 Photo 67 Photo 66 NOTE : The opening canopy is option. It can be ordered. All work done by factory. You will need to install the 2 x 2way valves and sequencer to operate canopy cylinders. Cut cockpit to fit fuselage. -
Page 23: Equipment Installation Into The F16 Arf
Assembly & Operation Manual EQUIPMENT INSTALLATION INTO F16 Equipment installation is a personal venture. There is one golden rule: Do it as neat and logical as possible! This will make fault finding and service of components eas- ier. The F16 basically consist of 7 circuits! 1. -
Page 24: Before You Fly
Assembly & Operation Manual BEFORE YOU FLY It is assumed that the builder of this kit has acquired the basic skills and knowl- edge necessary to make a safe and functional radio control installation into a model. Therefore, these notes are intended only to assist that experience. TRAVEL MAX SETTINGS: 1. - Page 25 Let the model roll out and apply brakes. Taxi back and do necessary adjustments to customize F16 before next flight. We at Skymaster wish you many happy flights with your F16! Add some landing lights and load those weapons. Blue skies!
-
Page 26: Ordinance
Assembly & Operation Manual Ordinance Photo 72 Skymaster produce a set of ordinance. It can be ordered painted or unpainted. All ordinance are slide fit for easy removal. All hard points and slots factory installed! P-26...
Need help?
Do you have a question about the ARF Plus Pro F-16 Falcon and is the answer not in the manual?
Questions and answers