Setting Tpi, Delayed & Optimum Start - ESI ESRTP4RF User And Installation Instructions Manual

N.B!! Volt free contacts.
Setting TPI, Delayed or Optimum Start
1. Switch the slider to OFF. Press and keep holding the A
and H buttons together (under the facia), then press the
Next button to enter the technical settings. Release all
buttons.
2. Press the +/- buttons to choose between:-
OFF: The programme will run according to settings
DS (dL StAr DS): When ON, the programmer will run in
Delayed Start mode. The start of the next programme
may be delayed up to 45 minutes depending on the
room temperature
22