Safety Notice; Fitting The Programmable Room Thermostat - ESI ESRTP4RF User And Installation Instructions Manual

Safety Notice

WARNING!
ALWAYS ISOLATE THE AC MAINS SUPPLY BEFORE
INSTALLING.
THIS PRODUCT MUST BE FITTED BY A COMPETENT
PERSON, AND INSTALLATION MUST COMPLY WITH THE
GUIDANCE PROVIDED IN THE CURRENT EDITIONS OF
BS767 (IEE WIRING REGULATIONS) AND PART "P" OF
THE BUILDING REGULATIONS.
WARNING!
DO NOT FIT THE RECEIVER TO A BACK PLATE THAT IS
LIVE.
SWITCH OFF MAINS BEFORE FITTING BACK PLATE AS
LIVE AND NEUTRAL CONTACTS MAY TOUCH WHILE
MOUNTING RECEIVER ON PLATE AND DAMAGE THE
PRODUCT.

Fitting the Programmable Room Thermostat

Product Positioning
The ideal position to locate the Programmable Room
Thermostat is about 1.5m above floor level, in a location
where the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts.
Do not position the thermostat near sources of heat, such
as radiators, lights, TV, direct sunlight or on an outside
wall.
18