Installation
1. Remove the front cover using a flat screwdriver in the
two holes at the top of the programmer and separate from
back plate.
2. If required, fix the back plate directly on the wall using
suitable wall plugs and screws or mount over existing wall
box. Replace the thermostat onto the back plate, securing
the bottom of the thermostat first and clicking the thermo-
stat into place. Alternatively, use the stand provided.
3. Insert the 2 x AA batteries provided in the battery com-
partment on the front of the thermostat, underneath the
facia.
The Programmable Room Thermostat is now installed and
will automatically start to control the room temperature
according to the factory pre-set programme as shown in
the User Instructions. The display shows the correct time
and date which is automatically set together with the
actual room temperature.
19