Frost Protection; Setting The Time And Date - ESI ESRTP4RF User And Installation Instructions Manual

Frost Protection

This function is provided as an option if it is desirable to
turn the heating off permanently. It is usually used in
summer.
To set the Frost Protection Mode:
1. Switch the slider to OFF to enter the Frost Protection
Mode. The display will show the frost protection
snowflake symbol and the set temperature will be 5
2. Switch the slider to AUTO to exit Frost Protection Mode
and revert to AUTO mode.

Setting the Time and Date

The time and date are factory set so it will not normally be
necessary to do this on site. Changes between summer and
winter time are handled automatically by the unit.
1. Switch the slider to Time/Date. The hour symbols will
flash, use + or – to adjust.
2. Press the Next
flash, use + or – to adjust.
3. Press the Next
use + or – to adjust the day.
4. Press the Next
use + or – to adjust the month.
5. Press the Next
use + or – to adjust the year.
6. Press the Next
or 24hour clock by using the + or – buttons.
7. Press the Next
seconds to automatically confirm and return to Run mode.
11
button and the minute symbols will
button and the day date will flash,
button and the month date will flash,
button and the year date will flash,
button and choose between 12hour
or Home button, or wait for 15
Fig. 6
C.
o