All Day Setting; Permanent Manual Overrides; Temporary Manual Overrides - ESI ESRTP4RF User And Installation Instructions Manual

All Day Setting

1. Switch the slider to AUTO.
2. Press the A button under the facia. The display will now
show AL (All Day).
3. Press the +/- button to set the temperature (increments
of 0.5°c).
4. The mode will quit by 00.00 that day. Press the Home
button to cancel and return to Auto Mode.

Permanent Manual Overrides

1. Switch the slider to MAN. MAN will appear in the
display.
2. Press +/– to adjust the temperature to the desired
setting. This will set a constant temperature 24hrs a day.
3. Switch the slider to AUTO to revert back to Auto mode.

Temporary Manual Overrides

1. To temporarily override the Programmable Room
Thermostat status or temperature press the +/- buttons.
The Programme Events Display (e.g P1) will no longer be
shown.
2. Press the + button to increase the set temperature in
increments of 0.5°c and/or press the - button to decrease
the set temperature in increments of 0.5°c.
3. Once the desired temperature is reached (and after
approx. 6 seconds) the time display will be replaced by a
display indicating the time left to the next programme (the
length of time the temporary override will run, if left
9