Using the Copy Function
The unit is provided with a copy function which allows an
adjusted programme to be copied to another day or set of
days. This avoids the necessity of re-entering a desired
programme for another day or sets of days. N.B. This
function only works in 7 Day setting.
To operate the copy function
1. Switch the slider to PROG and press the Home Button.
2. Press the C button to enter the COPY mode.
3. The A button chooses the day you want to copy from and
the +/- buttons choose the day you want to copy to.
4. Press the C button to confirm. The screen will show SER
(to show the Copy function is set).
Battery Replacement
When the low battery symbol flashes in the LCD display,
the batteries need to be replaced as soon as possible. The
battery compartment is located on the front of the
thermostat, under the facia cover. Remove the old batter-
ies and insert new ones. All settings including time are
maintained.
N.B. If the display ever goes blank during normal opera-
tion, the batteries need to be replaced with high quality
alkaline cells. The date, time and factory pre-set heating
times will be retained (assuming the back up battery has
not failed).
12