Auto Provisioning; Uad Settings - Polycom User Manual

Scroll to Authentication and press Select button.
Press Edit button to edit User ID enter PBXware extension number. Example:
1003. Then press the Ok button.
Scroll to Password and press Edit button, enter secret of the extension as
received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7.
Then press the Ok button.
Press Back button twice, then press Select button to Save Configuration.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
*123 to verify registration.
4.2

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register
the phone using DHCP or Static IP address.
The following topics are covered:
-

UAD Settings

- Creating Extension
- Registering Phone
4.2.1 UAD Settings
1. Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the
PBXware web administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
2. UAD settings
Navigate to Settings:UAD.
Make sure Polycom UAD is enabled. To check the UAD status click on the edit
icon corresponding to your Polycom phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP
is set to Yes.
© 2003 - 2012 Bicom Systems
Registering Phone 9