Auto Provisioning - Polycom VVX150 Configuration Manual

Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
Registrar Server
Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
Click on Voice Services and select SP1 Service.
X_DisplayLabel
Usually the same number as the Phone Number.
X_DisplayNumber
Usually the same number as the Phone Number.
AuthUserName
Your Extension number.
AuthPassword
The Secret of the extension as received in the e-mail associated with this extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
extension.
URI
Extension number and the server location in this format: 1001@192.168.1.10.
Click on the Submit button, then Reboot button.
You'll have to wait sometime prior for the device to reboot. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial *123 to verify
registration.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the