Mmemory Subsystem Commands - HP 86140A Series User Manual

Remote Operation

MMEMory Subsystem Commands

MMEMory Subsystem Commands
MMEMory:CATalog? [INTernal|FLOPpy]
Lists all files in the current directory. The return data will be formatted as:
Each <file listing> indicates the name, type, and size of one file in the direc-
tory list:
MMEMory:DATA <file_name>,<data_block>
MMEMory:DATA? <file_name>
Stores <data_block> in the memory location <file_name>. The query response
is the <data_block> stored in <file_name>, where <data_block> is an indefi-
nite block.
MMEMory:DELete <file_name> [,INTernal|FLOPpy]
Deletes the specified file.
MMEMory:INITialize [FLOPpy]
Formats a disk in the instrument's 3.5 inch disk drive.
MMEMory:LOAD:TRACe TRA|TRB|TRC|TRD|TRE|TRF,<file_name> [,INTernal|FLOPpy]
Loads the specified trace from mass storage.
MMEMory:STORe:TRACe TRA|TRB|TRC|TRD|TRE|TRF,<file_name> [,INTernal|FLOPpy]
Stores the specified trace to mass storage.
4-80
<mem_used>,<mem_free> {,<file listing>}
<file_name>,<file_type>,<file_size>