HP 86140A Series User Manual page 70

Using the Optical Spectrum Analyzer
The Markers Menus
To integrate between line markers
1 Press the front-panel Markers key.
2 Press the More Marker Functions.... softkey.
3 Press the Line Marker Menu.... softkey.
4 Select and set Wavelength Marker 1 and 2 to the desired integration limits.
5 Press the A dvanced Line Mkr Functions .... softkey.
6 Press the Integrate Limit softkey to toggle this function
Turning the integration limit
Marker 1 and Wavelength Marker 2 when the Trace Integration function in
See
To change the default marker settings
1 Press the front-panel Markers key.
2 Press the More Marker Functions.... softkey.
3 Press the Marker Setup.... softkey.
4 The Marker Setup panel opens. Refer to
for information on changing and selecting items in the setup panel.
3-30
"To calculate the total power under a trace" on page
Note
Although there is a single range controlling the total power integration, the marker
search range, and the wavelength sweep range, there are three independent state set-
tings for limiting the total power integration, the marker search, and the wavelength
sweep to the range.
will calculate the power between Wavelength
ON
"To Fill In a Setup Panel" on page 3-65
or .
ON OFF
ON
3-28.
.