The Traces Menus - HP 86140A Series User Manual

Using the Optical Spectrum Analyzer

The Traces Menus

The Traces Menus
The Traces softkeys are accessed by using the front-panel Traces key or the
Measure menu Traces selection on the menu bar. If you wish to change trace
settings, the front-panel Traces key provides access to the following functions
and setup panels:
Function
Active Trace....
Update <trace>
View <trace>
Hold <trace>....
Trace Math....
Default Math Trace C....
Default Math Trace F....
Exchange Menu....
All Math Off
Averaging....
Trace Setup....
3-56
See....
"To set the active trace" on page 3-57
"To set the update function for the trace" on page 3-57
"To set the display function for the trace" on page 3-57
"To set the Hold.... function" on page 3-58
"To set the trace math for trace C" on page 3-58
"To set the trace math for trace F" on page 3-59
"To exchange both the X-axis and Y-axis data of two traces" on
page 3-59
"To turn all math functions off" on page 3-59
"To set up averaging" on page 3-60
"To set the number of points in a sweep" on page 3-60