Replacing The Thread Catcher Unit - ELNA 9900 Service Manual

Replacing the Thread Catcher Unit

Connector
Setscrews (A)
To remove:
1. Remove spool stand, head cover (right), right
cover, left cover, moving head and lateral
moving unit.
2. Disconnect the thread catcher connector.
Remove the 3 setscrews (A), the thread
catcher.
To attach:
3. Connect the thread catcher connector.
Tighten the setscrews (A) while pressing the
thread catcher unit in the direction of arrows as
illustrated.
4. Adjust the thread catcher (see page 31).
5. Attach removed parts.
18
elna 9900