Table of Contents
Advertisement
Read through the manual before you begin, so you will have an overall idea of what to do.
Check all parts. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor.
Symbols used throughout this instruction manual comprise the following :
Apply epoxy glue.
Apply instant glue
(CA glue, super glue).
Assemble left and right sides
the same way.
The pre-covered film on ARF kits may wrinkle due to
variations of temperature. Smooth out as explained
here.
Main Wing
Drill holes with the specified
diameter (here: 2mm).
Cut off shaded portion.
Must be purchased separately!
with cover (cloth)
Align the center line of
main wing with aileron.
symbol!
Cut off excess.
Ensure smooth non-binding
movement while assembling
Pay close attention here!
Use an iron covered with a cloth,
Start at low setting. Increase the set-
ting if necessary. If it is too high, you
low setting
may damage the film.
Secure aileron hinges with instant glue,
being careful not to glue the wing and
aileron together.
Do not overlook this
3
Advertisement
Table of Contents
