Rudder / Horizontal Tail (Stabiliser)
Left and right Elevator glue properly.
Engine Mount
Drill holes with the specified
diameter (here: 2mm).
Cut off shaded portion.
For 2 stroke engine.
Apply epoxy glue.
Apply instant glue (CA glue, super glue).
Carefully apply
instant glue to both
sides of the hinge,
ensuring free
movement.
Align the mark on both mounts
with the mark on the fuselage.
Align the crankshaft of the engine with
the side line.
4 x 20mm
Screw
4mm
Engine Mount
Blind Nut
Pay close attention here!
3mm
3x4mm
Set Screw
1
2.2mm
Stopper
1
4 x 20mm
Screw
- - - - - - -4
4mm
Blind Nut
4
Do not overlook this symbol'
9