Items Required For Operation - Kyosho F4U CORSAIR 40 Instruction Manual

Radio controlled engine powered scale aircraft kyosho super quality series
Hide thumbs Also See for F4U CORSAIR 40:
Table of Contents

Advertisement

CAUTION: For details concerning the equipment listed below
(size, maker, etc.), check with your hobby shop.
This model will require a minimum 4 channel radio control
(with 5 standard servos) for aircraft, if having fixed
undercarriage, or 5 channel radio (with 6 standard servos),
if fitting retractable undercarriage.
CAUTION: Only use radio control systems designed for aircraft.
A minimum 4 channel radio control
system for aircraft
Read instruction manual supplied with radio control system thoroughly before use.
For retract gear you will, you will need 5channel radio, 1 retract servo,
1 extension cord.
Engine and Muffler
Model Aircraft Engine
* 2 Stroke .40 ~ .46
4 Stroke .48 ~ .53
Glow Plug
Propeller
Shock Protecting Foam
Double Side Tape
Scissors
Needle Nose Pliers
2
12 AA-size batteries,
either dry cell or NiCd.
Extension Lead x 2
(400mm)
Y- Harness x 1
Muffler Adapter
Propeller
Fuel Tube
Awl
Phillips Screwdriver (L, M, S)
Sharp Hobby Knife
Required for engine starting:
Model Glow Fuel.
One-touch Plug Heater Set
Fuel Bottle
Glow Plug Wrench
Glue and Paint
Instant Glue
Silicone Glue
Other equipment for enhancing aircraft operation & performance
Engine Starter
Spinner Nut
For retracting landing gear.
90° Rotating Retractable landing gear set (Hobbico)
Wire Cutters
Drill
Never use petrol/
gasoline with glow
engines.
Epoxy Glue (30 minute type)
Paint
12V Battery (for starter)
Fuel Filter
Rod and screw

Advertisement

Table of Contents
loading

Table of Contents