Before You Begin; Symbols Used Throughout The Instruction Manual - Kyosho NEXUS 30 S Instruction Manual

1
Read through the manual before you begin, so you will have an overall idea of what to do.
2
Check all parts. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor.
3
How to read the instruction manual:
9
2.6 x 10mm
Cap Screw
3 x 3mm
Set Screw
2.6mm
Nylon Nut
Key Number, Part Name, True-to-scale
Diagram, Quantity Used
4
Symbols used throughout the instruction manual, comprise:
Part bags used.
Apply epoxy glue.
Apply threadlocker (screw cement).
Apply grease.
Apply instant glue (CA glue, super glue).
Assemble left and right sides
the same way.
4
HH-2
2
This instruction manual uses seve-
1
ral symbols. Please note them
during the entire assembly.
2
3 x 3mm
Tail Rotor Assembly
x
2mm

BEFORE YOU BEGIN (1)

Example
Assemble in the specified
order.
2
Assemble as many times as
specified (here: twice).
True-to-scale diagram.
Drill holes with the specified
diameter (here: 2mm).
Cut off shaded portion.
Tentatively tighten.
2.6mm
92
2.6 x 10mm
All parts except screws are identified by
key numbers. For purchasing spare parts,
find the key no. of the part needed in the
spare part list and refer to the left column
to look up the corresponding order no.
Pay close attention here!
Must be purchased separately!