Fly With App; Connect The Quadcopter With App; Compass Calibration; Fly With Transmitter - UBSAN H501A User Manual

7.3 Fly with App

APP flight is only availabe when fly in outdoors.

7.3.1 Connect the Quadcopter with App

1.Power on the quad;
2.Search for WI-FI on devices:
For iPhone or iPad, please select【 Settings 】>Wi-Fi;
For Android system,please select【 Settings 】>WLAN> W-Fi.
3.Click HUBSAN_H501A_XXXXXX,and password is 12345678.The password cannot be changed
by user.
4.Connection completed
5.Open X-Hubsan APP, choose Hubsan H501A to enter into the user interface for flight.
NOTICE：
For safety,please don't use the smart device for other purposes while it is connecting with Hubsan App.
If you want to control the quad with other devices, please restart the quad.

7.3.2 Compass Calibration

Compass calibration is required before the first flight, otherwise the compass may not work
properly. The compass is very sensitive to the electromagnetic interference which can create
false compass data and lead to poor flight performance or even flight failure. Calibrate the
compass regularly can help to provide the optimal performance of the quad.

7.4 Fly with transmitter

7.4.1 Bind the quad with transmitter

The binding process is completed in the factory.
For re-binding, press Enter button and power on the transmitter simultaneously until "Bind
to Plane" is displayed, then power on the drone and place it very close to the transmitter, the
binding process will be completed after one "beep" sound.
If the binding failed, please power off the drone and repeat the above steps.
7.4.2 Compass calibration
Compass calibration is required before the first flight, otherwise the compass may not work
properly. The compass is very sensitive to the electromagnetic interference which can create
false compass data and lead to poor flight performance or even flight failure. Calibrate the
compass regularly can help to provide the optimal performance of the quad.
Do not calibrate the compass in a strong magnetic field
Do not carry ferromagnetic materials with you while calibrating the compass,
such as keys, cell phones, etc.
Compass calibration procedures:
1) Pull the left stick to the left side, and move the right stick from left to right quickly and
repeat until the transmitter displays "Calib compass1", and the 4 LED indicators blink
circularly.
2) Horizontally rotate the X4 in a clockwise direction until the LCD screen shows "Calib
compass 2", and the 4 LED indicators blink alternately.
3) Put the X4 nose down and vertically rotate it in a clockwise direction until the "Calib
compass 2" disappears.
4) Calibration is completed when the 4 LED indicators remain solid.
X-Hubsan H501A
13