Line Fly Mode - UBSAN ZINO PRO+ User Manual

Waypoint Planning: You can preset the waypoint parameters such
as the number of waypoints, the altitude of each waypoints and
other parameters. The aircraft will follow the preset parameters after
you activate waypoint mode. You can control the flying speed
during flight or you can pause or resume the Waypoint mode.
Waypoint Memory: After entering the mode, fly the aircraft and tap
on "Memorize Waypoints" on the APP and the aircraft will mark the
location. After memorizing all the waypoints, upload and execute,
then the aircraft will fly according to the memory.
If the aircraft is not in the starting position, the aircraft will fly to the
starting position before starting this function.

4.5.6 Line Fly Mode

Tap on "Mode Selection" then "Line Fly Mode".Set the angle,dis-
tance and speed of the aircraft.
Performance requirements:
1. Set the angle (0 ~ 360 °, accuracy 1 °);
Set the distance (10-100 meters, accuracy 1 meter); set the speed
(1-8 m / s, accuracy 0.1);
2. Once setup is complete, the aircraft will execute Line Fly mode.
During the flight, pilots can take photos or videos manually, or
pause / resume / stop the flight at any time.
During the flight, the throttle stick is controllable and the other
directions are uncontrollable;
N
Connected
Waypoint
Waypoint
Planning
T a p o n e a n d e n t e r i n t o
t h e o p e r a t i o n i n t e r f a c e
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
Waypoint
Memory
S P E E D 0 . 0 M / S
H : 0 . 0 m D : 0 . 0 m
21
1 0 0 %