Install The Transmitter Battery; Transmitter Stick Calibration - UBSAN H501A User Manual

16
17 2.4G
18 5.8G
Strap fastener
19

6.1.2 Install the transmitter battery

Remove the cover
Do not mix old and new batteries

6.1.3 Transmitter stick calibration

Mode 1: Push the left stick to the upper left corner and the right stick to the upper right
corner then power on the transmitter simultaneously, Rotate both sticks in circles for three
times when the LCD screen displays "Calibrate Stick" then release both sticks and press "Exit"
until one beep sound is made, indicating a successful calibration.
Mode 2: Push both sticks to the upper left corner then power on the transmitter
simultaneously. Rotate both sticks in circles for three times when the LCD screen displays
"Calibrate Stick" then release both sticks and press "Exit" until one beep sound is made,
indicating a successful calibration.
10
WWW.HUBSAN.COM
LCD Display flight data and live stream
Antenna Transmit control signals
Antenna Receive the video transmission
To fasten the strap on tansmitter
Install 8 x AA batteries
according to the correct polarities
A A A A
A A A A
Do not mix different types of batteries
A A A A
A A A A
Close the cover