Start To Fly - UBSAN Q4 Instruction Manual

6 START TO FLY

6.1 Power-On (Failsafe) Procedure
Your Q4's ight controller is designed with a Power-On safety feature that ensures the
Q4's motor will not start unless it detects a suitable radio-control signal when the Q4 and
the transmitter both power on and paired.
6.1.1 Make sure the throttle stick is in the full down position.
6.1.2 Power on the transmitter and the red LED will blink. Do not move any other stick or
trim before the transmitter and Q4 nish pairing, or the Q4 will drift. The transmitter LED
will turn green after pairing is successfully completed.
6.2 Transmitter Sticks And Q4 Control Responses
CAUTION: To avoid loss of control, always move the transmitter sticks slowly. Be aware that
control inputs will reduce available lift. Be ready to use a little extra throttle to maintain height
during maneuvers.
MODE 2
Throttle increases/decreases the ying height of your Nano quad.
MODE 1
7