Horizontal Calibration - UBSAN H501A User Manual

开始
START
开始
开始
校准成功
校准成功
Calibration
投准成功
completed
校准成功

7.4.3 Horizontal calibration

Horizontal calibration is required when the quadcopter drifts during flight.
Please follow the calibrating procedures:
1) Push the left stick to the most right side, and move the right stick from left to right
quickly until the 4 LED indicators blink slowly
2) Calibration is completed whrn the 4 LED indicators stop blinking.
Start
14
WWW.HUBSAN.COM
Pull the left stick to the
左边摇杆向左打到最大量程
left side
左边摇杆向左打到最大量程 左边摇杆向左打到最大量程
左边摇杆向左打到最大量程
左边摇杆向左打到最大量程
机头朝下垂直旋转飞机直到
"calib compass 2"消失
Put the X4 nose down and vertically
机头朝下垂直旋转飞机直到
rotate it in a clockwise direction until
"calibrate compass 2"消失
the "Calib compass 2" disappears.
机头朝下垂直旋转飞机直到
"calib compass 2"消失
Push the left stick to
the most right side
Move the right stick left to right
左右拨动右边摇杆，直到遥控器
quickly, the LCD screen displays
提示"calibrate compass 1"
"Calib compass 1"
左右来回拨动右边摇杆，直到
遥控器显示"calib compass1"
左右来回拨动右边摇杆，直到
遥控器显示"calib compass1"
水平旋转飞机直到遥控器
显示"calib compass 2"
Horizontally rotate the X4 in a
水平旋转飞机直到遥控器显示
clockwise direction until the LCD
"calibrate compass 2"
screen shows "Calib compass 2"
水平旋转飞机直到遥控器
显示"calib compass 2"
M o v e t h e r i g h t s t i c k
from left to right quickly