JDS Uniphase OLP-34 Operating Instructions Manual page 15

Test head cover
1
Connector panel
2
Device label
3
Display
4
External power supply connector
5
USB interface (only BN 2302/11/12/13) for power
supply and measurement data downloads
Battery compartment (on rear of the device)
6
Key pad
7
Keys
Each key has two functions. Press the key once for the
first function. Press and hold the key for more than 2
seconds for the second function of the key.
JDSU
First function: Press to switch the
device on and off (ECON).
Second function: Press to switch the
device on (PERM).
First function: Press to select a
wavelength out of 5 predefined
wavelengths.
Second function: Change the
predefined wavelength.
First function: Enable/Disabe
automatic wavelength recognition.
Second function: Clear current
memory location.
First function: Press to store current
measurement.
Second function: Recall the stored
measurements.
First function: Press to toggle level
display between:
• dBm/Watt (absolute mode)
• dB (relative mode)
Second function: Set reference level.
OLP-34/-35/-38
3 G
ETTING
S
TARTED
11