Replacing The Stability Foot; Procedure - Dell Aurora R6 Service Manual

Replacing the stability foot

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the computer on a clean and flat surface with the bottom cover facing
up.
2 Align the tabs on the stability foot with the slots on the bottom cover and
snap the stability foot to lock it in place.
3 Turn the computer over and place it in upright position.
computer. After working inside your
After working inside your
23