Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Aurora R6 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align and slide the power-button board on the power-button board bracket
and snap it into place.
2 Align the screw holes on the power-button module with the screw holes on
the top cover.
3 Replace the screws that secure the power-button module to the top cover.
4 Route the power-button module cable through the routing guide on the top
cover.

Post-requisites

1 Replace the
2 Replace the
3 Replace the
top cover.
right-side cover.
left-side cover.
computer. After working inside your
After working inside your
119