Table of Contents
Advertisement
Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align and snap the optical-drive bezel to the optical drive.
2
Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
3
Replace the screw that secures the optical-drive bracket to the optical drive.
4
Lift the securing tab and slide the optical-drive assembly through the front of
the computer until the securing tab snaps into place.
5
Connect the data and power cables to the optical drive.
Post-requisites
1
Follow the procedure from step 10 to step 11 in
unit".
2
Replace the
left-side
cover.
computer. After working inside your
After working inside your
"Replacing the power-supply
111
Hide quick links:
Advertisement
Table of Contents
