Clearing Cmos Settings; Prerequisites; Procedure - Dell Aurora R6 Service Manual

Clearing CMOS Settings

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Follow the procedure from step 1 to step 4 in
unit".

Procedure

1 Locate the CMOS jumper (P217) on the system board.
For information on the location of the CMOS jumper, see
components".
2 Disconnect the system-board power cable from the system board.
3 Remove the jumper plug from pins 217 and replace it on pins 216 (P216).
4 Wait for 5 seconds.
5 Remove the jumper plug from pins 216 and replace it on pins 217.
left-side cover.
computer. After working inside your
After working inside your
"Removing the power-supply
"System-board
137