Table of Contents
Advertisement
Replacing the top-chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the holes on the top-chassis fan with the holes on the top-chassis fan
bracket.
2
Insert the ends of the rubber grommets through the holes at each corner of
the fan.
3
Align the grommets in the fan with the holes at each corner of the top-
chassis fan bracket and pull through until they snap into place.
4
Route the top-chassis fan cable through the routing guide on the bracket.
5
Align the tabs on the top-chassis fan with the slots on the chassis and slide
the fan until it snaps into position.
6
Replace the screw that secures the top-chassis fan to the chassis.
7
Connect the top-chassis fan cable to the system board.
Post-requisites
1
Follow the procedure from step 10 to step 11 in
unit".
2
Replace the
106
left-side
cover.
computer. After working inside your
After working inside your
"Replacing the power-supply
Hide quick links:
Advertisement
Table of Contents
