System Diagnostic Lights - Dell Aurora R6 Service Manual

System diagnostic lights

The computer POST (Power On Self Test) ensures that it meets the basic
computer requirements and the hardware is working appropriately before the
boot process begins. If the computer passes the POST, the computer continues
to start in a normal mode. However, if the computer fails the POST, the computer
emits a series of LED codes in amber color during the start-up.
The following table shows different light patterns and what they indicate.
Table 13. Diagnostics
Number of Power LED
flashes
1
2
3
4
5
6
7
3,6
3,7
Problem description
System board: BIOS and ROM failure
No memory or RAM detected
System board or chipset error
Memory or RAM failure
CMOS battery failure
Video card or chip failure
CPU failure
BIOS recovery image not found
BIOS recovery image found but invalid
163