Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Route the power-button board cable through the slot on the top panel.
2
Align and snap the power-button module into the slot on the top panel.
3
Route the power-button board cable through the routing guides on the chassis.
4
Connect the power-button board cable to the system board.
5
Place the computer in an upright position.
Post-requisites
1
Replace the
top
2
Replace the
slim optical
3
Replace the
front
4
Replace the
right-side
102
computer. After working inside your computer, follow
After working inside your
cover.
drive.
cover.
cover.
computer. For more safety best
www.dell.com/
Before