Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Inspiron 24 5000 Service Manual

Identifier
Status
Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Connect the power-button board cable (0SDC1) to the power-button board and
route the cable through the routing guide on the middle frame.
2 Align the power-button board to the slot on the middle frame and place the
power-button board on the middle frame.
3 Align the screw holes on power-button board shield to the screw holes on middle
frame.
4 Replace the two screws (M2x3.5) that secures the power-button board shield to
middle frame.
Identifier
Status

Post-requisites

1 Replace the inner
2 Replace the stand.
GUID-FBA68EE4-1E13-4F28-9B84-362694B97060
Released
computer. After working inside your computer, follow
After working inside your
GUID-BBCD2F9C-73C1-455D-B425-613C19121447
Released
GUID-7E8ED145-5E0A-485E-9E46-CFB1A1437B4E
Released
frame.
computer. For more safety best
www.dell.com/
Before
43