NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the optical drive into the optical-drive bay through the front of the computer.
2. Replace the screw (M3x5) that secures the optical drive to the chassis.
3. Connect the data cable and power cable to the optical drive.
Post-requisites
1. Replace the
front
cover.
2. Replace the
right-side
cover.
Replacing the optical drive
computer. After working inside your computer, follow the instructions in
Replacing the optical drive
16
After
27