Chapter 9: Replacing The Optical Drive; Procedure; Post-Requisites - Dell XPS 8920 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Align the screw hole on the optical-drive bracket with the screw hole on the optical drive.
2. Replace the screw that secures the optical-drive bracket to the optical drive.
3. Align the tabs on the optical-drive bezel with slots on the optical drive and snap it in place.
4. Slide the optical drive into the optical-drive cage through the front of the computer till it snaps into place.
5. Connect the power and data cables to the optical drive.

Post-requisites

1. Follow the procedure from step 9 to step 10 in
2. Replace the right-side cover.
Post-requisites
1. Follow the procedure from step 9 to step 10 in
2. Replace the right-side cover.
Replacing the optical drive
computer. After working inside your computer, follow the instructions in
"Replacing the power-supply
"Replacing the power-supply
unit".
unit".
Replacing the optical drive
9
After
23