Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
2
Replace the screw that secures the optical-drive bracket to the optical drive.
3
Replace the optical drive bezel.
4
Slide the optical drive into the optical-drive cage through the front of the
computer till it snaps into place.
5
Connect the power and data cables to the optical drive.
Post-requisites
1
Follow the procedure from step 9 to step 10 in
unit".
2
Replace the
right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the power-supply
Before
81