Table of Contents
Advertisement
Quick Links
Add: 2/F Bldg. H-3 East Industrial Zone of Overseas Chinese
Town Nanshan Dist. Shenzhen, P.R.China
Postcode: 518053
Fax:+86-755-8609 6130
Tel: +86-755-8609 6076
E-mail: export@kirisun.com
Website:http://www.kirsun.com
Kirisun Electronics (Shenzhen) Co., Ltd
PT 3300
FM HANDHELD TRANSCEIVER
USER S MANUAL
Advertisement
Table of Contents
Related Manuals for Kirisun PT3300
Summary of Contents for Kirisun PT3300
- Page 1 PT 3300 FM HANDHELD TRANSCEIVER USER S MANUAL Add: 2/F Bldg. H-3 East Industrial Zone of Overseas Chinese Town Nanshan Dist. Shenzhen, P.R.China Postcode: 518053 Fax:+86-755-8609 6130 Tel: +86-755-8609 6076 E-mail: export@kirisun.com Website:http://www.kirsun.com Kirisun Electronics (Shenzhen) Co., Ltd...
- Page 2 The maintaining of transceiver only can be done by To make sure you can get familiar with the professional technician functions and proper operating methods of your transceiver, please read this instruction manual carefully. This Manual is suitable for the PT-3300 FM Transceiver. Kirisun Electronics (Shenzhen) Co., Ltd...
- Page 3 1. Unpacking and Checking Equipments CONTECTS Carefully unpack the transceiver. We recommend that you 1. Unpacking and Checking Equipments identify the items listed in the following table before discarding the packing material. If any damage has occurred Supplied Accessories during shipment, file a claim with the carrier immediately. 2.
- Page 4 2. Preparation (2)Installing/Removing the Battery Pack (1)Charging the Battery Pack Match the four grooves of the battery pack Plug the AC adaptor cable into with the corresponding guides on the back of the adaptor jack located on the the transceiver. rear of the charger;...
- Page 5 3. Getting Acquainted 4. Basic Operation (1)Exterior figure Switch on Switch on the transceiver by turning the Power /Volume control clockwise till a click is heard, then the transceiver will be in the state of stand by time, and the orange LED light flashes once and disappears.
-
Page 6: Auxiliary Functions
5. Auxiliary Functions Scanning function When the channel selector is on CH16, the transceiver will automatically turn into scanning status. When the transceiver Monitor receives the single, it will stick on the current channel, and When there is no signal received, the squelch circuit on the startup scanning after the channel disappeared 3 seconds. -
Page 7: Troubleshooting Guide
CTCSS/DCS 6. Specification 39 groups of optional standard CTCSS and 83 groups DCS are available (PC programmable). Some channels may have pre- Specification PT 3300 programmed with CTCSS/DCS tones. A CTCSS/DCS tone is a sub-audio tone which allows you to ignore (not hear) calls from Frequency (1)400~420MHz (2)450~470MHz other parties who are using the same channel.
Need help?
Do you have a question about the PT3300 and is the answer not in the manual?
Questions and answers