Agilent Technologies B1500A Training Manual page 95

Module 3
Data Display and Management
To Change Display Setup
View > Display Setup...
This dialog box is used to change the graph scale and data to be displayed in the Data Display
window.
The X-Y Graph area sets the X and Y1 to Y8 axes of the X-Y Graph Plot area.
Name: Specifies the parameter for the axis
•Sharing: Specifies the group for sharing the Y axis scale. Select from Group 1, Group 2, Group 3,
Group 4, or None (no grouping). The Scale, Min, and Max values are shared by the Y axes in the
same group. The scale set by Run Time Auto Scale, Auto Scale, Zoom in, and/or Zoom out are also
shared. If another layer on the Data Display window contains an X-Y trace which has the same name
for both its grouped Y parameter and its X parameter, the scaling will also be shared by this X-Y
trace.
•Scale: Scale of the axis, Linear or Log
•Min: Minimum value of the axis
•Max: Maximum value of the axis
The List Display area selects the variables to be listed in the List Display area. Up to 20 variables
can be set.
The Parameters area selects the variables to be listed in the Parameters area. Up to 20 parameters
can be set.
3-23