Agilent Technologies B1500A Training Manual page 91

Module 3
Data Display and Management
To Add Pointers
Pointer > New
To add a pointer, set Marker ON, click Pointer > New. A pointer and description (pointer ID and X-
Y coordinate values) appear. Then move the pointer you desire by using the rotary knob or the
mouse wheel.
The following functions are available for the selected pointer(s) or description(s) via the Pointer
menu, the Pointer icons, or the right-click menu.
Clicking on a pointer will select the pointer. To select the multiple pointers, click the pointer while
holding down the Shift key on the keyboard.
Clicking on a description will select the description of a pointer. To select the multiple descriptions,
click the description while holding down the Shift key on the keyboard.
Shape: Sets the shape of the selected pointer(s).
Hide Description/Show Description: Hides or shows the description of the selected pointer(s).
Delete: Deletes the selected pointer(s).
The rotary knob or the mouse wheel can be used to move the selected pointer in the VAR1 direction.
The pointer can not be moved in the VAR2 direction.
Dragging a description of pointer moves this description of pointer.
3-19