Agilent Technologies B1500A Training Manual page 57

Result Example
1. check
2. select
Test result data (record) is automatically saved after measurement.
1. Check the CMOS check box.
2. Select Id-Vd (or Vth gmMax) and click the Select button.
3. Change the SMU setting as follows.
Substrate: SMU1
Source: SMU2
Gate: SMU3
Drain: SMU4
4. Create your preset group (ex. Exercise).
5. Save the changed setup to your preset group.
After this class exercise, the Id-Vd setup and the Vth gmMax setup will be saved in your preset
group.
3. change
3. change
3. change
3. change
2-23
Module 2
Getting Started
4. create
5. save