Agilent Technologies B1500A Training Manual page 94

To Change List Display Properties
Edit > List Display Properties...
This dialog box is used to set the data display format in the List Display area. This dialog box is
opened by clicking the Properties... button in the List Display area or by selecting Edit > List Display
Properties... menu of the Data Display window.
Display:
Check the following check box to add the data status or the physical unit to data. Unchecking the box
removes it.
•Data Status: Adds or removes the status code before data.
•Physical Unit: Adds or removes the physical unit after data.
Number Format:
Selects the data display format from the following formats.
• Engineering Format (with Unit Prefix):
Data display with arithmetic point, SI prefix, and unit.
Example: -1.2345 mA
• Scientific Notation:
Data display with arithmetic point, exponential part (E, +/- sign, and three-digit number), and unit.
Example: -1.23456789012345E-003 A
Data Status
Physical Unit
Example:
C -1.2345 V
Example: -1.2345 mA
Example: -1.23456789012345E-003 A
3-22
Module 3
Data Display and Management