Agilent Technologies B1500A Training Manual page 83

Module 3
Data Display and Management
To Enable Marker and Line
Line > Line 1 ON/OFF
Marker > Marker ON/OFF
Line 2 ON/OFF
Marker ON/OFF
Line 1 & Line 2
To enable maker, click the Marker ON/OFF icon, or select the Marker > Marker ON/OFF menu.
To enable the Line 1, click Line 1 icon and select one of the line mode. Or select the Line > Line 1
ON/OFF menu and select one of the line mode.
To enable the Line 2, click Line 2 icon and select one of the line mode. Or select the Line > Line 2
ON/OFF menu and select one of the line mode.
If you enable the Normal line, two cursors are available. The cursors specify the points that the line
passes through.
If you enable the Gradient line, a cursor is available. The cursor specifies the point that the line
passes through.
If you enable the Regression line, two cursors are available. The cursor specify the measured data
used to draw the regression line.
3-11