Agilent Technologies B1500A Training Manual page 43

Typical Value Selection
You do not need to hit the keyboard.
When you set a test condition of application test, you do not need to use keyboard. You can select
the value from the typical values as shown below.
•Click the entry field of a setup parameter by using the touch screen or the mouse. This displays the
typical values for the specified parameter on the softkeys.
•Select one of the softkeys.
Also you can use the following manner.
•Point the entry field of a setup parameter by using the mouse.
•Right click the mouse to display the popup menu.
•Click the Select menu to display the typical values for the specified parameter.
•Select one from the typical values.
Note:
The typical values are defined in the test definition. And you can change the values by using the
Define typical values window opened by clicking the Typical Values button on the Test Specification
screen of the Test Definition window. For the Test Definition window, see Module 9.
2-9
Right clicking
this field
displays the
menu.
The values are
defined as
typical values
in the Test
Definition.
Module 2
Getting Started