Table of Contents
Advertisement
6-2
Power OFF
This section provides Power OFF details.
Before following power OFF procedures below, check that the Industrial Box PC is ON by examining
the LED indicators on the Box PC.
6-2-1
Power OFF Using the Power Button
1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the Industrial Box PC within 1 second.
The Industrial Box PC will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to 2-3 Power Button on page 2 - 7 for power button location information.
3
Wait until the PWR LED is OFF.
The Box PC is powered OFF.
Additional Information
The Box PC will restart automatically if a UPS is connected to the I/O connector of the Box PC.
Use the Power button of the UPS or remove the input power from the UPS for a normal shut-
down of the Box PC.
6-2-2
Power OFF Using Windows Shut Down
1
Ensure all programs are closed.
If required close all active programs.
2
Select the Windows Shutdown button.
To display the Shutdown button:
• For Windows 10 select the Windows button and then the Power button.
• For Windows 7 select the Windows button.
The Industrial Box PC will shut down.
3
Wait until the PWR LED is OFF.
The Industrial Box PC is powered OFF.
NY-series Industrial Box PC User's Manual (W553)
6 Operating Procedures
6 - 3
6
Advertisement
Table of Contents
