Table of Contents
Advertisement
7 Maintenance
Repair Windows with the System Repair Disk
Use the following procedure to repair the Windows operating system with a System Repair Disk.
Ensure:
• The Industrial Box PC is powered OFF.
• A System Repair Disk is created earlier and it is available.
To perform a system repair:
1
Connect a USB keyboard, a USB mouse and a USB external DVD drive to the Industrial Box
PC.
2
Power ON the Industrial Box PC and immediately press the F11 key repeatedly.
3
Insert the System Repair Disk in the DVD drive.
4
Select DVD Drive as boot device and press Enter.
The message Windows is loading files ... and a progress bar appear.
5
Press any key to start and wait until the recovery software started.
6
Select your keyboard language and then select Next.
The System Recovery Options window appears.
7
Select Restore your computer using a system image that you created earlier and select
Next.
8
Select Use latest available system image and then select Next.
The Re-Image Your Computer window appears.
9
Do not change the setting to restore C: , select Next.
10
Review the settings and select Finish.
11
Wait until the repair process is finished, this can take several hours.
12
Restart the Industrial Box PC.
Windows is repaired.
Additional Information
• Refer to http://windows.microsoft.com/ for System repair details.
• Refer to Create a Windows System Repair Disk on page 5 - 61 for System Repair disk crea-
tion.
• Refer to 5-9 Create Backup and Repair Data on page 5 - 58 for Backup creation.
7 - 36
NY-series Industrial Box PC User's Manual (W553)
Advertisement
Table of Contents
