Table of Contents
Advertisement
Refer to 2-9-9 UPS on page 2 - 21 for details.
2
Ensure the UPS is connected to the Box PC with a USB cable.
Refer to 5-8-1 Connect UPS Using the USB Connector on page 5 - 52 for details.
3
Open the Power Attendant Lite Utility installer folder and activate the installer file setup.exe.
4
Follow the installer steps to complete the installation.
The Power Attendant Lite Utility is installed.
Configuration
Configure the Power Attendant Lite Utility before using the Box PC with a UPS connected using USB.
To configure the Power Attendant Lite Utility:
1
Activate the icon of the Power Attendant Lite Utility to start the software.
A UPS selection window will be displayed.
2
Select the connected UPS.
A Login window will be displayed.
3
Login with ID Admin and password omron.
The Top window with UPS status information will be displayed.
4
Configure the parameters for your specific situation.
NY-series Industrial Box PC User's Manual (W553)
3 Software
3
3 - 17
Advertisement
Table of Contents
