Table of Contents
Advertisement
The controller board can be installed in slot 1 or slot 2.
Install the controller board into slot 2 of the riser cage.
7.
Install the riser cage in the server
8.
Connect the cables from port one and two on the backplane to port one on the P440 controller board.
9.
If the H240 controller board is installed, the SAS cables will use both ports.
8SFF
o
("Install the PCI riser
cage" on page 24).
Hardware options installation 80
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant DL360 Gen9 and is the answer not in the manual?