Installing The Fsbbu - HP ProLiant DL360 Gen9 User Manual

Server #1 + FSBBU
module load
condition (%)
10 (75W- 6.25A)
20 (150W- 12.5A)
30 (225W- 18.5A)
40 (300W- 25A)
50 (375W- 31.25)
60 (450W- 37.5)
70 (525W- 43.5A)
80 ( 600W- 50A)
90 (675W- 56.25A)

Installing the FSBBU

CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis
unless all bays are populated with a component or a blank.
To install the component:
Access the product rear panel.
1.
Remove the blank.
2.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the FSBBU or
power supply blank to cool before touching it.
Press the battery check button located on the rear of the FSBBU module to check the battery
3.
condition before installing the unit into the power supply bay. To locate the battery check button and
for more information on the FSBBU module LED status, see "Flex slot battery backup module LEDs
and buttons (on page 106)."
Server #2 + FSBBU Supported (Yes/No)
module load where server #1 lost
condition (%) input AC power
90 (675W- 56.25A) Yes
80 (600W- 50A) Yes
70 (525W- 43.5A) Yes
60 (450W- 37.5) Yes
50 (375W- 31.25) Yes
40 (300W- 25A) Yes
30 (225W- 18.5A) No
20 (150W- 12.5A) No
10 (75W- 6.25A) No
Supported (Yes/No)
where server #2 lost
input AC power
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Hardware options installation 105