Nvme Ssd Components - HP ProLiant XL450 Gen10 Maintenance And Service Manual

NVMe SSD components

The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without
allowing the device and bus to complete and cease the signal/traffic flow.
CAUTION:
Do not remove an NVMe SSD from the drive bay while the Do not remove LED is flashing. The Do
not remove LED flashes to indicate that the device is still in use. Removing the NVMe SSD before
the device has completed and ceased signal/traffic flow can cause loss of data.
Item Description
1 Locate LED
2 Activity ring LED
3 Drive status LED
4 Do Not Remove LED
42 NVMe SSD components
1 2 3 4
Status
Solid blue = The drive is being identified by a host application.
Flashing blue = The drive carrier firmware is being updated or
requires an update.
Rotating green = Drive activity
Off = No drive activity
Solid green = The drive is a member of one or more logical
drives.
Flashing green = The drive is rebuilding or performing a RAID
migration, stripe size migration, capacity expansion, or logical
drive extension, or is erasing.
Flashing amber/green = The drive is a member of one or more
logical drives and predicts the drive will fail.
Flashing amber = The drive is not configured and predicts the
drive will fail.
Solid amber = The drive has failed.
Off = The drive is not configured by a RAID controller.
Solid white = Do not remove the drive. Drive must be ejected
from the PCIe bus prior to removal.
Flashing white = Ejection request pending
Off = Drive has been ejected
5
7 6
Table Continued