Table of Contents
Advertisement
Item
LED
4
Drive status
NVMe SSD components
The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing
the device and bus to complete and cease the signal/traffic flow.
CAUTION:
Do not remove an NVMe SSD from the drive bay while the Do not remove LED is flashing. The Do not
remove LED flashes to indicate that the device is still in use. Removing the NVMe SSD before the
device has completed and ceased signal/traffic flow can cause loss of data.
Item
Description
1
Locate LED
2
Activity ring LED
20
NVMe SSD components
Status
Definition
Off
Removing the drive does not cause a logical
drive to fail.
Solid green
The drive is a member of one or more logical
drives.
Flashing green
The drive is rebuilding or performing a RAID
migration, strip size migration, capacity
expansion, or logical drive extension, or is
erasing.
Flashing amber/
The drive is a member of one or more logical
green
drives and predicts the drive will fail.
Flashing amber
The drive is not configured and predicts the
drive will fail.
Solid amber
The drive has failed.
Off
The drive is not configured by a RAID
controller.
Status
Solid blue = The drive is being identified by a host application.
Flashing blue = The drive carrier firmware is being updated or
requires an update.
Rotating green = Drive activity
Off = No drive activity
Table Continued
Advertisement
Table of Contents
